How does CO2 laser marking machine realize engraving on wood

Usually, companies use laser marking machines to use metal raw materials more. So, can wood be marked and carved with laser marking machines? ——Of course it can. Now talk to us about how the laser marking machine finishes carving and processing on wood. Let me first declare that not all laser marking machines can perform laser marking on wood well. For example: fiber laser marking machine is difficult for wood carving and processing, but CO2 laser marking machine can be simple. Do it. Three-dimensional dynamic marking machine

The wavelength of the laser is mainly different from that of the fiber laser, so it absorbs non-metal materials better. If only a simple marking or carving on the wood, low power will do. If you want to make large-format, thick graphics, you should choose a high-power CO2 laser marking machine. The marking effect is different depending on the raw material. Below, the editor will give us a specific introduction: Log: Wood is the most commonly used laser processing material so far, it is very simple to carve and cut. Light-colored wood is easily vaporized by laser, so it is more suitable for carving. Each kind of wood has its own characteristics, and some are finer, and larger laser power is required when carving or cutting. Plywood: Carving on plywood is not much different from carving on logs. There is only one thing to pay attention to. The depth of carving should not be too deep.

The CO2 laser marking machine launched by Chaomi Laser adopts RF-encouraged CO2 laser, which is stable in function and can be operated for a long time. It uses high-speed digital scanning head, which is small in size, fast and stable. The laser power is controlled by software, continuous Adjustable, marking and cutting can be done on one product at the same time. Whole machine system: fast speed, clear marking, not easy to wear, high efficiency of carving and cutting, environmental protection, energy saving, extremely stable function, long-term continuous operation can be directly applied to mass online processing production line. Easy to use, low cost of operation, according to customer needs, can be installed on the active assembly line, select full active operation and computer panel control. It can form a permanent mark, and can use the serial number to make a single product. The mark cannot be changed, which can prevent the possibility of fake and inferior after cleaning with waste packaging. Flying UV laser marking machine